Beiter Arrow Rest
The Beiter arrow rest can be easily adjusted to suit all types of arrows. Spare arms may be required for this.
It has been designed to be used for both left- and right-handed archers. It may be changed within seconds, for example from Carbon to Aluminium shafts. A scale on the Support allows a re-producible position of the Finger. Therefore the height adjustment of the Beiter Rest is extremely precise: the Nocking Point can be raised or lowered within seconds and by less than 1mm. The position of the arrow on the Plunger Tipp as well. The Beiter Rest for Recurve makes no noise (according to our test archers).
The Support has incorporated a revolutionary Guiding System for the Finger, which may change position, carried by a specific designed Spindle. Due to the Support being applied with a specific angle (max ca. 15°), the Arrow Position versus the Plunger and the Nocking Point may be determined and changed very quickly and more precise than with any other Rest on the market! A scale offers the opportunity to re-position the finger after tests or changes.
At the moment three different fingers are available:
16-17-0,65 for shafts with medium diameter Ø 7,8mm +/-1mm (approx. 15/64"-19/64")
18-23-0,77 for shafts with large diameter Ø 9,3mm +/-1mm (approx. 20/64"-24/64")
Two fingers (of the same make) are included in each Box, but extra fingers are available as spare part.
AVERAGE CUSTOMER REVIEWThere are 0 reviews
- There are no reviews